November 12, 2019 – Nordson ASYMTEK, a Nordson company, introduced the Vortik Series of pumps that incorporates progressive cavity pump technology in a fully integrated dispensing system solution, complete with process controls for mass flow control and an Automated Ratio Control (ARC) system for mixing two-component fluids.
Three pump families in the Vortik series – VPs, VPm, and VPg – are based upon general volume ranges, and each includes models for dispensing one-component (1K) and two-component (2K) fluids. ASYMTEK’s ARC technology in Fluidmove software takes the guesswork out of set-up to ensure accurate mixing ratios of the 2K materials. This process control is done inside the dispensing platform – no need to make samples, weigh them remotely, and manually calculate mix ratios or flow rates. In addition, changes in speed or volumetric output are logged, providing traceability.
The Vortik VPs pump delivers low flow rates and the smallest depositions of 1- and 2-component fluids, such as conductive epoxies, solder paste, and other adhesives used during electronics manufacturing for automotive, mobile devices, and MEMs. With a flow rate of 0.2 microliters per second, the VPs pump produces lines narrower than 300 micrometers.
The Vortik VPm and VPg pumps dispense volumes from 2 to 400 microliters/second for applications in electronics package assembly and automotive electronics, such as encapsulation, potting, bonding, sealing, and thermal grease.
Because of a closed-pump design, dispensing is independent of variables like fluid pressure and ambient temperature changes, resulting in high consistency and accuracy. Dispensing is faster during production because no fluid refill cycle is needed.
November 12, 2019 – Nordson ASYMTEK, a Nordson company, introduced the Vortik Series of pumps that incorporates progressive cavity pump technology in a fully integrated dispensing system solution, complete with process controls for mass flow control and an Automated Ratio Control (ARC) system for mixing two-component fluids.
Three pump families in the Vortik series – VPs, VPm, and VPg – are based upon general volume ranges, and each includes models for dispensing one-component (1K) and two-component (2K) fluids. ASYMTEK’s ARC technology in Fluidmove software takes the guesswork out of set-up to ensure accurate mixing ratios of the 2K materials. This process control is done inside the dispensing platform – no need to make samples, weigh them remotely, and manually calculate mix ratios or flow rates. In addition, changes in speed or volumetric output are logged, providing traceability.
The Vortik VPs pump delivers low flow rates and the smallest depositions of 1- and 2-component fluids, such as conductive epoxies, solder paste, and other adhesives used during electronics manufacturing for automotive, mobile devices, and MEMs. With a flow rate of 0.2 microliters per second, the VPs pump produces lines narrower than 300 micrometers.
The Vortik VPm and VPg pumps dispense volumes from 2 to 400 microliters/second for applications in electronics package assembly and automotive electronics, such as encapsulation, potting, bonding, sealing, and thermal grease.
Because of a closed-pump design, dispensing is independent of variables like fluid pressure and ambient temperature changes, resulting in high consistency and accuracy. Dispensing is faster during production because no fluid refill cycle is needed.
© 2019, Best Brothers Group. All rights reserved.
